We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Cisco Catalyst 1000-16P-2G-L Network Switch, 16 Gigabit Ethernet (GbE) PoE+ Ports, 120W PoE Budget, two 1 G SFP Uplink Ports, Fanless Operation, Enhanced Limited Lifetime Warranty (C1000-16P-2G-L)
SKU
C1000-16P-2G-L
Login for pricing
In Stock
Catalyst 1000-16P-2G-L Network Switch, 16 Gigabit Ethernet (GbE) PoE+ Ports, 120W PoE Budget, two 1 G SFP Uplink Ports, Fanless Operation, Enhanced Limited Lifetime Warranty (C1000-16P-2G-L)
- HARDWARE CONFIGURATION: 16 10/100/1000 Gigabit Ethernet (GbE) PoE+ ports, 2 SFP uplink ports; Compact form factor switch with Power budget of 120W and Perpetual PoE+ support for uninterrupted power to PoE devices even in case of switch reboot
- MANAGEMENT: Manage the switch via the Cisco IOS CLI (command-line interface) and/or intuitive web UI. Centrally monitor and configure up to 8 switches via a Single IP or with any third party network management tool
- SECURITY: Enterprise Class Security which natively supports IPv4/IPv6 FHS Security features such as port security, DHCP snooping, dynamic ARP inspection which can easily be configured using a Single 'Auto-Secure' command along with 802.1x support for all connected devices
- Enterprise Class Hardware: Tamper-proof switch designed with the best of Cisco's trustworthy solutions technologies like HW anchored secure boot and Trust anchor Module to ensure you get an authentic and secure product
- PEACE OF MIND: Enhanced limited lifetime warranty
| Power over ethernet | Yes |
|---|---|
| Ports type | Gigabit Ethernet (10/100/1000) |
| Ports quantity | 16 |
| SKU | C1000-16P-2G-L |
| EAN | 0889728248501 |
| Manufacturer | Cisco |
| Availability | In Stock |
The Cisco Catalyst 1000-16P-2G-L Network Switch is an enterprise-class fixed managed Gigabit Ethernet Layer 2 switch designed for small businesses and branch offices. This simple, flexible and secure network switch is ideal for critical IoT (Internet of Things) deployments. It operates on Cisco IOS Software and features a CLI (command-line interface) as well as an intuitive web user interface.
| Management features | |
|---|---|
| Multicast support | Yes |
| Traffic classification | Yes |
| ARP inspection | Yes |
| Switch type | Managed |
| Web-based management | Yes |
| Quality of Service (QoS) support | Yes |
| MIB support | Yes |
| Switch layer | L2 |
| Configuring Location Settings (CLI) | Yes |
| Network | |
| IGMP snooping | Yes |
| IPv6 multicast entries | 1024 |
| IPv4 multicast entries | 1024 |
| IGMP entries | 1024 |
| Networking standards | IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| VLAN support | Yes |
| Spanning tree protocol | Yes |
| Number of VLANs | 256 |
| Link aggregation | Yes |
| Broadcast storm control | Yes |
| Auto MDI/MDI-X | Yes |
| Auto-negotiation | Yes |
| Virtual LAN features | |
| VLAN support | Yes |
| Number of VLANs | 256 |
| Data transmission | |
| Number of VLANs | 256 |
| Jumbo frames | 10240 |
| Number of static routes | 16 |
| MAC address table | 16000 entries |
| Switching capacity | 36 Gbit/s |
| Jumbo frames support | Yes |
| Static route | Yes |
| Forwarding rate | 26.78 Mpps |
| Performance | |
| Auto-negotiation | Yes |
| Processor frequency | 800 MHz |
| Memory type | DRAM |
| Mean time between failures (MTBF) | 706983 h |
| Internal memory | 512 MB |
| Flash memory | 256 MB |
| Built-in processor | Yes |
| Processor model | ARM7 |
| Harmonized System (HS) code | 85176990 |
| Technical details | |
| Product colour | Grey |
| Processor frequency | 800 MHz |
| Mean time between failures (MTBF) | 706983 h |
| Built-in processor | Yes |
| Products per shipping (inner) case | 1 pc(s) |
| Ports & interfaces | |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| USB 2.0 ports quantity | 1 |
| Console port | RJ-45/Mini-USB |
| Security | |
| Loop protection | Yes |
| BPDU filtering/protection | Yes |
| Authentication | Web-based authentication |
| SSH/SSL support | Yes |
| IGMP snooping | Yes |
| Access Control List (ACL) | Yes |
| Authentication type | RADIUS |
| IGMP entries | 1024 |
| DHCP features | DHCP snooping |
| Multicast features | |
| Multicast support | Yes |
| IPv6 multicast entries | 1024 |
| IPv4 multicast entries | 1024 |
| Memory | |
| Memory type | DRAM |
| Internal memory | 512 MB |
| Flash memory | 256 MB |
| Design | |
|---|---|
| Country of origin | China |
| Product colour | Grey |
| LED indicators | Yes |
| Market segment | Business |
| Indication | |
| LED indicators | Yes |
| Packaging content | |
| Packaging content | C1000-16P-2G-L Switch, Accessory Kit, 1 printed document |
| Power | |
| Power plug type | Type C |
| AC input voltage | 110 - 220 V |
| AC input frequency | 50 - 60 Hz |
| Power over Ethernet (PoE) | |
| Power over Ethernet plus (PoE+) ports quantity | 16 |
| Total Power over Ethernet (PoE) budget | 120 W |
| Power over Ethernet (PoE) | Yes |
| Operational conditions | |
| Storage temperature (T-T) | -25 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating temperature (T-T) | -5 - 50 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 4500 m |
| Weight & dimensions | |
| Width | 268 mm |
| Depth | 296.9 mm |
| Height | 44 mm |
| Weight | 2.38 kg |
| Packaging data | |
| Package width | 349.2 mm |
| Package depth | 387.4 mm |
| Package height | 160.3 mm |
| Package weight | 3.7 kg |
| Logistics data | |
| Products per master (outer) case | 1 pc(s) |
| Harmonized System (HS) code | 85176990 |
| Quantity per pack | 1 pc(s) |
| Other features | |
| Packaging content | C1000-16P-2G-L Switch, Accessory Kit, 1 printed document |
| Country of origin | China |
You may also be interested in
| Product |
Bestseller
Cisco Catalyst 1000-16P-2G-L Network S...
Login for pricing
|
Recommended
LevelOne 8-Port Gigabit PoE Switch, 80...
Login for pricing
|
LevelOne 16-Port Gigabit PoE Switch, 8...
Login for pricing
|
LevelOne 16-Port Fast Ethernet PoE Swi...
Login for pricing
|
Popular
LevelOne 16-Port Fast Ethernet PoE Swi...
Login for pricing
|
New
LevelOne 6-Port Gigabit PoE Industrial...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
C1000-16P-2G-L
|
GEP-0822
|
GEP-1621
|
FEP-1601
|
FEP-1612
|
IES-0620
|
| Description |
The Cisco Catalyst 1000-16P-2G-L Network Switch is an enterprise-class fixed managed Gigabit Ethernet Layer 2 switch designed for small businesses and branch offices. This simple, flexible and secure network switch is ideal for critical IoT (Internet of Things) deployments. It operates on Cisco IOS Software and features a CLI (command-line interface) as well as an intuitive web user interface.
|
The LevelOne GEP-0822 provides 8 x 10/100/1000Mbps ports with IEEE 802.3at PoE-Plus supported. This switch is IEEE 802.3af/at compliant, and provides power and data over a single Ethernet cable to any PoE device, with total power budget of 240W, up to 30W per port. Together with Energy Efficient Ethernet (IEEE 802.3az) standard compliant, it substantially lower power consumption during periods of low-link utilization. Moreover, supports Gigabit Ethernet connectivity with 9K jumbo frames for network performing enhancement. Ideal for small businesses that prefer an inexpensive solution for PoE deploying infrastructure.
- IEEE 802.3af/at PoE compliant to simplify deployment and installation - 10/100/1000Mbps wire speed transmission and reception - 9K jumbo frames to increase data transfer rates - Supports 8K MAC address auto-learning and auto-aging - Auto-detection and protection of non-standard PoE devices - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - 19-inch rackmount kit included - Total PoE power budget: 240W, up to 30W per port - Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az) |
The LevelOne GEP-1621 is a Gigabit PoE-Plus Switch with 16 x 10/100/1000Base-T PoE-Plus ports. This switch is IEEE 802.3af/at compliant, providing power and data over a single Ethernet cable to any PoE device, with total power budget of 240W, up to 30W per port. Ideal for desktops, it is also 19-inch rack-mountable, which provides convenient and flexible installation. The GEP-1621 is designed for small-to-median businesses that prefers an affordable solution for PoE deploying infrastructure.
- 16 PoE-Plus Gigabit Ethernet ports - 10/100/1000Mbps wire speed transmission and reception - IEEE 802.3af/at PoE compliant to simplify deployment and installation - Auto-detection and protection of non-standard PoE devices - 9K jumbo frames to increase data transfer rates - Supports 8K MAC address auto-learning and auto-aging - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az) - 19-inch metal housing - Total PoE power budget: 240W, up to 30W per port |
FEP-1601 is a 16-port 10/100Mbps Fast Ethernet Switch with Power over Ethernet (PoE) capability. With 16 dip switches, each PoE port can be manually set for On-Off control. FEP-1601 supports up to 30W on each LAN port when the DIP switch is in the ON position . Using a LevelOne PoE repeater, it is possible to extend the connection a further 100 meters, or even daisy-chain several PoE repeaters together for greater distances. Dual 10/100Mbps ports can connect with other edge switches or NVR as uplink ports
- IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - PoE on/off control per port by dip switches - Total PoE power budget: 250W, up to 30W per port - 19-inch metal housing |
LevelOne FEP-1612 features 16 10/100Mbps Fast Ethernet ports with IEEE 802.3at/af PoE interfaces. It supports MDI / MDI-X convertible on 16 10/100Mbps ports and provides PoE inject function on PoE ports which are able to IEEE 802.3af or 802.3at compliant powered devices remotely.
The FEP-1612 equipped with the MDI/MDI-X auto detection for easily plug and play connection, regardless of cabling types in straight through or crossover. It also provides a simple, cost-effective, and highly reliable network connection for data and power transmission. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks. It fits all kind of Ethernet installations such as campus, workgroup, department, enterprise, telecom or industrial applications. The FEP-1612 features non-blocking 3.2Gbps backplane that greatly simplifies the tasks of upgrading your LAN for catering to increase bandwidth demands. - IEEE 802.3af/at PoE compliant to simplify deployment and installation - Auto-detection and protection of non-standard PoE devices - Supports 4K MAC address auto-learning and auto-aging - 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - 19-inch metal housing - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - Total PoE power budget: 480W, up to 30W per port |
LevelOne IES-0620 Industry Ethernet Switch provides 4 PoE ports 10/100/1000Base plus 2 port Gigabit SFP to enable high speed network at mission-critical environment. With the industrial standard DIN-rain mount; this switch can be easily installed in the cabinet, plus the clearly visible status LEDs provide simple monitoring of port link activity. Moreover, the SFP slots support pluggable modules that enabling you to choose from a variety of transceivers. This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at PoE standard at maximum 30W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is compatible with IEEE802.3af standard PD devices.
- 4 10/100/1000Base-T PoE ports - 1 Gigabit Combo + 1 Gigabit SFP(100/1G) slot - PoE ports can support the IEEE 802.3at standard and power up 30W - 1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, - Auto-Negotiation, Auto-MDI/MDIX - 40°C to 75°C (-40°F to 167°F) operating temperature range - DIN-Rail mount installation - Metal case design and compliant with IP30 standard - Wide input power range 12 to 55VDC |
| Short Description |
Catalyst 1000-16P-2G-L Network Switch, 16 Gigabit Ethernet (GbE) PoE+ Ports, 120W PoE Budget, two 1 G SFP Uplink Ports, Fanless Operation, Enhanced Limited Lifetime Warranty (C1000-16P-2G-L)
|
8 x RJ-45, 10/100/1000 Mbps, PoE+, 2 kg
|
16 x 10/100/1000Base-T RJ-45 PoE+, 250W, 32Gbps, MAC 8K, IEEE 802.3/u/x/ab/af/at/az
|
16x 10/100Mbps PoE, 250 W, 19", 4096 MAC, 3.2Gbps
|
16 x 10/100Base-TX RJ-45 PoE, 500W, 3.2Gbps, MAC 4K, IEEE 802.3/u/x/af/at
|
4x PoE 10/100/1000Base, 1x Gigabit SFP, 1x Gigabit Combo SFP/RJ-45, 1024 MAC, 12Gbps
|
| Manufacturer |
Cisco
|
LevelOne
|
LevelOne
|
LevelOne
|
LevelOne
|
LevelOne
|